|
I rebuilt the Raid on my Windows 2003 server; this had to be done because my Raid was broken. I used the Array configuration tool for the rebuild & this worked fine. However after the successful rebuild, few data on the drive are corrupted or destroyed & the system re-boot is not happening. Let me know if you have any idea.
(comments are locked)
|
|
Corruption could have happened even before the drive failed to work; this is because Raid 1 is a mirror. Try booting the OS after removing the failed drive.If this does not work then you will need to repair install the OS or you will need to do a restore from backup. Don’t use different drives for your array & also SATA drives are not used for this process.
(comments are locked)
|
Your answer